Accessories

Compact, lightweight trolley with attached backpack for short travels. - Detachable daypack - Smooth running & replaceable skate wheels - Cabin luggage dimensions for air travel (excluding daypack) - Weight: 3.2kg (20% lighter than previous generation) - Volume 40L + 20L

A waterproof, dry-bag-inspired / urban-inspired pannier set that overcomes limitations normally found with waterproof bags. - OCEANWEAVE 600D reclaimed fishnet polyester with waterproof polyurethane coating. - HYDRACORE liner provides an exceptional IPX5 waterproof rating. - Rixen & Kaul VARIO 2 spring-loaded hooks immediately adjust from 6mm-16mm, without any need for tools. - Rixen & Kaul lower SLIDE-LOCK and FLIP-LOCK hold panniers firmly in place. - Triple webbing tie-downs allow variable size/shape loads to be carried outside of the main cavity. Ideal for attaching U-locks. - Intuitive waterproof roll-down closure system. - Ultra-visible three-way 3M triangle logos. - Ultra-stiff Polypropylene backing plate. - Front and rear light clips. - Carry handles. - D-Rings built in to hook attachment points for additional luggage tie-down, or for attaching your own shoulder strap. - Volume 45.2L / 2755 cu/in (pair) (22.6L / 1378 cu/in each bag) - Weight 1530g / 3.37 lbs (pair) - (765g / 1.69 lbs each bag) - Dimensions 43x30x17.5cm / 16.9-inches x11.8-inches x6.9-inches (each bag)

Discover new routes, and ride with confidence using the Edge Explore 2 GPS cycling computer This navigator features a bright 3” touchscreen display, and it’s simple to set up and ready to ride straight out of the box - Ride like a local during your next on- or off-road adventure - High-contrast maps provide bike-specific, turn-by-turn navigation — and highlight popular roads and trails along with high-traffic areas - When connected to your compatible eBike, receive navigation guidance and alerts based on your bike’s battery status, assist level and range - Plus, safety features such as incident detection and Assistance let you ride with greater peace of mind (Requires setup and your smartphone to be in an area with network coverage) - Computer Type: Wireless - GPS: Yes - Connectivity: ANT+, BT, Wi-Fi - Customizable Screen: Yes - Battery Type: Lithium Ion - Touchscreen: Yes - External Sensor Compatibility: Speed/Cadence/HR/Power

It’s got your back while you ride ahead. Varia™ eRTL615 rearview radar for eBikes is our first battery-free radar. It plugs directly into your compatible eBike. It detects cars approaching from behind and provides audible and visible alerts when paired with your compatible Garmin smartwatch, bike computer or even your smartphone with the Varia™ app. This radar also has a bright tail light to make you more visible to motorists, adding peace of mind to every ride. And since you don’t have to charge it between rides, that’s one less thing to worry about.

Utilizing the ultimate in cycling GPS technology, the Lezyne Mega XL is a must have device for serious riders. It has a large, 2.7-inch 240x400 high-resolution screen with the option of vertical or horizontal viewing. It can simultaneously pair with Bluetooth Smart or ANT+™ enabled power meters, heart rate monitors and speed/cadence sensors, in addition to compatible electronic drivetrains. When paired with an iOS or Android handheld through the free Lezyne Ally V2 app, the device provides turn-by-turn navigation and phone notifications (incoming calls, texts and message app notifications). It has on-screen preloaded maps, provides turn-by-turn navigation, off-line navigation and can be instantly customized. Live tracking (Lezyne Track) can be activated in the app to let friends and family follow rides in real-time. Furthermore, the device is equipped with GPS/GLONASS, a barometer and an accelerometer. Combined, these greatly improve accuracy and data recording. It also has best-in-class battery runtime of up to 48 hours. All this and a whole lot more. - Navigate with Komoot to generate sport-specific, topographic routing tailor-made for your next outdoor experience - Create interactive videos of your ride with Relive - Lezyne Track offers subscription-free live tracking and telemetry - Add data fields to map and navigation screens - Super accurate, advanced data recording system combines GPS plus Glonass satellites - Simultaneous ANT+ and Bluetooth® Smart connectivity - Multiple real-time features when paired to the Lezyne Ally app - Durable, composite construction

- Water based liquid with advanced surfactants resulting in excellent degreasing - Anti-corrosion agent added to solution to protect steel parts - Due to natural evaporation and splashes, expect to lose 8-10L per month from tank

Better health. Faster splits. More me-time. Whatever your goals may be, the Fluid2 helps you get the most out of each indoor training ride. The large, precision-balanced flywheel (with patented fan design) lets you easily customize each ride simply by shifting gears, just as you would outside. This design also helps keep your Fluid2 working better – longer. And, thanks to our built-to-last manufacturing process, the Fluid2 can help you conquer one goal after the next. - Fluid resistance unit provides a quiet and consistent ride. - Progressive resistance offers the widest resistance range and road-like feel. - Best-selling trainer in the USA - Compatible with Zwift and other indoor cycling apps

- Crank Saver—Pedal thread repair and insert kit - Includes: left and right reaming tap 5/8x24 TPI, 10 pedal thread inserts for left crank arm, 10 pedal thread inserts for right crank arm, metal box with cut out SOS foam trays.

Rated for loads up to 100 pounds, the Burley Flatbed utility trailer’s simple, two-wheel design makes it versatile and easy to pack. From everyday errands to backyard adventures, the Flatbed helps you go anywhere with just about anything. - Aluminum frame - Two wheel chassis and Burley hitch system - 16" spoked alloy wheels with push button release - Compact fold flattens trailer for storage and transportation - Flex connector allows bike to lay flat while trailer remains upright - Interior dimensions: L 32.5" x W 20.5" x H 7

Lightweight and safe rear-frame-mounted child bike seat with a contemporary design, providing premium comfort for your child. Features - Maximum child comfort and a safe, custom fit thanks to the adjustable padded 5-point harness - Provides a smooth ride for your child in the soft and shock-absorbing seat - Lightweight yet sturdy seat combining a hard outer shell with soft padding for premium child comfort - Very quick, easy, and convenient securing of your child with the magnetic childproof safety buckle - Ensures a perfect fit as your child grows thanks to adjustable foot rests and foot straps - Added visibility thanks to built-in reflector - Easy to clean and to keep dry due to the seat's water-repellent materials - Designed and tested for children from 9 months* to 6 years old, up to 48.5 lbs/22 kg. - Quick and easy mounting of the child bike seat on your bike *Consult a pediatrician for children under 1 year old. Technical specifications - Weight capacity: 48.5 lb - Weight: 10.1 lb - Safety harness: 5-point - Meets safety standards

Hitch Sunlite's Trailer Tot to your bike and take your child to the local park, the pool, and the library. For convenient storage in your car or garage, its protective steel frame folds flat. If the weather turns sour, you can drop the front of the canopy so your little one stays dry. The Trailer Tot easily connects to your bike's axle and its quick-release 16-inch wheels roll smoothly along the pavement behind you. Clear canopy windows offer great views and reflective strips ensure you'll be seen too. There's even a pair of side compartments for those all-important snacks.

- Waterproof double bicycle bag including roll-top closure. - Equipped with integrated LED lighting (batteries sold separately). - Large capacity of 41 liters in total. - Includes pre-assembled MIK adapter plate and therefore easy to attach.

The SBK-1 is a professional level kit for installing and removing cartridge bearings in bicycle suspension pivots. A comprehensive set of 27 precision-machined hard-anodized guides enables compatibility with a wide range of bearing inner and outer diameters. Combined with our proven bearing press design, the SBK-1 quickly and easily pushes the old bearing out of the linkage and reinstalls the new bearing precisely and squarely. - Magnetic back plate for easy configuration and assembly - Organized in a convenient storage case Includes extractor cups/drifts for the following ODs: - 16mm - 17mm - 19mm - 20.6mm - 21mm - 22mm - 22.3mm - 24mm - 26mm - 28mm - 28.6mm - 30mm - 32mm - 35mm Includes extractor studs and pilots for bearings with the following IDs: - 8.5–9mm - 10mm - 12mm - 12.7mm - 15mm - 17mm - 20mm NOTE: For bearing extraction, the SBK-1 requires a minimum of 3mm of flat linkage structure outside the bearing to support the extractor cup/drift. For bearings without this flat structure, consider using the Park Tool SHX-1 Slide Hammer Bearing Extractor.

Click-Torque wrench in the unmistakable, robust Wera design with high accuracy. Easy setting and saving of the default value. The audible and tactile clicks on reaching the scale values also facilitate the safe setting of the desired torque value. For right-hand use (clockwise torque control) and with 45-tooth reversible ratchet mechanism. - With 1/4" square drive, reversible ratchet, 45 teeth - Easy setting and saving of the desired torque value with audible and tactile clicks when reaching the scale values - Audible and tactile release mechanism when the set torque value is reached - Measuring range: 2.5-25 Nm; Precise to +/- 4% - Designed with ergonomic 2-component handle suitable for right-hand use

The perfect pair of bags for any adventure: you'll be astonished at how much gear fits in the Ortlieb Bike-Packer Plus! The classic flap closure is easy to operate and provides a maximum of stowage on top. The waterproof, three dimensional front compartment offers additional space for many of the small items you may need to access quickly while en route. The durable, high-quality Cordura fabric provides optimal protection against water, dust and abrasion. Thanks to the proven QL2.1 system with self-closing hooks, attaching the Bike-Packer Plus to your bike rack and removing it again is a matter of seconds. All of these features allow you to devote your attention to your tour and the beautiful sights to see along the way, no matter what the weather! - Pannier pair with lid closure and large packing volume - PU-laminated Cordura - QL2.1 mounting system for racks with max. 16 mm tube diameter - 20 mm hook available as separate accessory (e.g. for E-bikes) - Reduction inserts for tube diameters 8, 10 und 12 mm with anti-scratch function preventing abrasion on the rack - Hooks adjustable without requiring tools - Lower hook rail made of two-component hard-soft synthetic with anti-scratch function protecting the rack - Including integrated inner pocket and shoulder strap - Due to its symmetrical form it is possible to use only one bag on left or right side - The dust flap - with easily operable pull cord - under the lid provides protection e.g. against water, dust and snow - The edge protector prevents contact with spokes and abrasion - Simultaneous use of Ortlieb Travel-Biker possible - Highly reflective 3M Scotchlite reflector - Easy to clean inside

The CP 18L is a camera backpack for the ambitious amateur sports photographer, or the professional who aims to travel light when shooting. - Rapid access to the camera from the side - Perfect positioning and optimal air circulation - Belt system for a tripod, poles or ice axe - Integral rain cover - Additional compartments for laptop, hydration bladder, personal items and small parts - Padded, movable internal dividers & straps allows the photographer to carry his camera safely even when things get rough

Commute Pro 22

The FR TRAIL E-RIDE is a protector backpack, specially designed to meet the needs of e-mountain biking. - CE-certified Liteshield Back Protector with 95% shock absorption - Separate, centred, well-padded battery compartment with ultra-safe fixation system - Charger strap fixation system - Fleece-lined control display compartment - Separate key ring included - Tool compartment - XC/DH helmet carry - Material: N 210D Ripstop HD, 3D Air Mesh, Airo Flex - Volume: 20L - Size: 27 x 56 x 14cm (10.6 x 22 x 5.5") - Weight: 1.5kg (3.3lbs)

Next-level performance protector daypack focused on carrying comfort, weight reduction, and flexibility. - Next generation protector backpack - Liteshield PLUS (level 2) - Extremely lightweight - Next-level carrying comfort, back fit and load distribution - Wide hip wings and Airoflex hip belt for optimum fit - Quick access to separate tool compartment - Integrated waterproof raincover - Compatible with hydration bladders up to 3L - Volume: 26L

- Next generation protector backpack - Liteshield PLUS (level 2) - Extremely lightweight - Next level carrying comfort, back fit and load distribution - Wide hip wings and Airo Flex hip belt for optimum fit - Quick access to separate tool compartment - Integrated waterproof rain cover - Compatible with hydration bladders up to 3L - Material: KODRA, P200D, Airo Flex - Volume: 26L - Size: 26 x 50 x 16cm (10.2 x 19.7 x 6.3") - Weight: 1.07kg (2.4lbs)

The Deluxe Wall-Mount Repair Stand easily mounts to any post or wall stud. This shop-quality stand places the bike approximately 14.5 inches from the wall, so you'll have plenty of work space. The awesome clamp is Park's Professional Micro-Adjust model, which features replaceable rubber jaws; fits seatposts and frame tubes from 7/8 to 3-inch diameter; includes recesses for cable housing and rotates 360 degrees for optimum bike positioning. This great stand lets you work on your bikes just like a pro and is built to last.

A waterproof, dry-bag-inspired / urban-inspired pannier set that overcomes limitations normally found with waterproof bags. - OCEANWEAVE 600D reclaimed fishnet polyester with waterproof polyurethane coating. - HYDRACORE liner provides an exceptional IPX5 waterproof rating. - Rixen & Kaul VARIO 2 spring-loaded hooks immediately adjust from 6mm-16mm, without any need for tools. - Rixen & Kaul lower SLIDE-LOCK and FLIP-LOCK hold panniers firmly in place. - Triple webbing tie-downs allow variable size/shape loads to be carried outside of the main cavity. Ideal for attaching U-locks. - Intuitive waterproof roll-down closure system. - Ultra-visible three-way 3M triangle logos. - Ultra-stiff Polypropylene backing plate. - Front and rear light clips. - Carry handles. - D-Rings built in to hook attachment points for additional luggage tie-down, or for attaching your own shoulder strap. - Volume 31.6L / 1928 cu/in (pair) (15.8L / 964 cu/in each bag) - Weight 1320g / 2.91 lbs (pair) - (660g / 1.46 lbs each bag) - Dimensions 39x27x15cm / 15.4-inches x10.6-inches x5.9-inches (each bag)

- 11 speed compatible - Allows removal, installation and peening of rivets

Park Tool has long provided some of the best cutting and machining tools in the bicycle industry. Their 690 Cutting Facers reflect their commitment to maintaining this high level of quality. Please read below for use and compatibility information specific to each size cutter: - 45mm (690): The 690 cutting facer is used on the HTR-1, HTR-1B, BFS-1, and BTS-1 cutting and facing tools. The facer has an outside diameter of approximately 45mm. - 57mm (690XL): The 690-XL is a larger version of the 690 facer for the HTR-1 Head Tube Reamer and Facer. It has a nominal outside diameter of 57mm. It may be used in conjunction with the 788 reamer. It is also used with the 767 Pilot or the 768 Pilot to face only the large diameter headtubes used with, "low profile," ZS-type headsets. - 65mm (690-XXL): The 690-XXL faces large headtubes. It has a nominal outside diameter of 65mm. Use the 690-XXL facer with the 750.2 Centering Cone Adaptor and 789 Reamer or 790 Pilot when facing head tubes with internal diameters of 55.95–55.90mm.

Low or high rider? Just take both! tubus presents the first combi-carrier that combines the properties of both systems: Lateral driving stability thanks to the low center of gravity, with space on top for bulky items such as a sleeping pad and sleeping bag. With the GRAND EXPEDITION FRONT for the front, you don't have to make any compromises when transporting luggage. This is tube. Not suitable for mounting on spring or carbon forks without eyelets. The fork must be approved by the manufacturer or the bicycle manufacturer for mounting a luggage rack. There must be no squeeze connections.

- Precision tool for quickly and easily removing the headset crown race from the crown race seat of the fork - Fully adjustable, allowing precise, independent positioning of each blade around the crown race for flexibility in fitting around crown race interferences - Works with 1,1-1/8,1-1/4,1.5" forks (suspension or rigid) and crown races with outside diameters up to 64mm - Accepts steerers up to 430mm - All steel construction for long life

Park's Bench-Mount Repair Stand easily bolts to any workbench and includes Park's shop-quality solid cast-aluminum Adjustable-Linkage Clamp that boasts durable, protective and replaceable vinyl jaw covers. The clamp holds seatposts and frames from an inch to 1 5/8 inches in diameter and there are slots for cables, too. Plus, this stand rotates 360 degrees for optimum bike positioning.

Topeak's TwoUp TuneUp Bike Stand easily holds 2 bikes up and out of the way. But, the best part is that it's solid enough to serve as a light-duty work stand as well! Made with tough aluminum tubing, the center pillar extends to almost 7 feet while the tripod base acts as a super-stable platform. The 2 included bike mounts swivel up to 30 degrees to accommodate sloping tubes and the lower mount includes a handlebar stabilizer to hold your bike while you're wrenching. Plus, this awesome stand has the capacity to carry up to 4 bikes and 158.7 pounds.

Park Tool's 130 Repair Stand Base is designed for the PRS-3, PRS-3OSLB, PRS-3 OS-1, PRS-3 OS-2 and the PRS-23 LB Repair Stands (each sold separately). • 22-1/2" x 22-1/2" x 7/16" (57cm x 57cm by 1.1cm) steel plate • Approximately 68 lbs (31k) • Black painted

A full-featured, waterproof urban-inspired pannier that overcomes limitations normally found with waterproof bags. Offers exceptional external load flexibility, removeable internal organizers for digital devices, and a convenient external access pocket for keys and/or phone. - OCEANWEAVE 600D reclaimed fishnet polyester with waterproof polyurethane coating. - HYDRACORE liner provides an exceptional IPX5 waterproof rating. - Rixen & Kaul VARIO 2 spring-loaded hooks immediately adjust from 6mm-16mm, without any need for tools. - Rixen & Kaul lower SLIDE-LOCK and FLIP-LOCK hold panniers firmly in place. - Intuitive waterproof roll-down closure system. - Waterproof outer pocket. - Removeable 14.2-inches x10.2-inches padded laptop/electronics sleeve/organizer. - Removeable 10-inches x8-inches padded tablet/electronics sleeve/organizer. - External zippered pocket for keys/wallet, etc... - Keychain clips + 2 x Axiom keychains. - Independent main compartment and outer compartment compression/cargo straps provide exceptional load control. - Outer straps allow gear to be carried outside of the main cavity. Ideal for unplanned loads faced by commuters. - Strap control loops to protect against strap damage if straps are not secured. - Dual daisy-chain tie-down strips for additional load attachment. - Ultra-visible three-way 3M triangle logos. - Ultra-stiff Polypropylene backing plate. - Front and rear light clips. - Carry handle. - D-Rings built in to hook attachment points for additional luggage tie-down, or for attaching your own shoulder strap. - Volume 22.6L / 1379 cu/in - Weight 1220g / 2.69 lbs (incl. laptop sleeve and tablet sleeve) – (995g / 2.19 lbs without sleeves) - Dimensions 47x28.5x13.5cm / 18.5-inches x11.3-inches x5.3-inches main compartment 33x18x7.5cm / 13-inches x7-inches x3-inches pocket - Pannier sold individually